Likutis: 2 Turime. Pristatymas 1-2 d. d.
Digitus Aluminum outlet strip with pre-fuse DN-95410 Sockets quantity 8, 250 Vac, 50/60Hz, 2 m supply IEC C14 plug
KNX BUS MODULIS/INTEGRA INT-KNX-2 SATEL
- Rašyti apžvalgą
288,10 €
Su mokesčiais
Pristatymas į namus nuo: 4.72 €
1 - 3 darbo dienosDimensions 80 x 57 mm|Unit Brutto Volume 0.0006311 cubm
Saugus atsiskaitymas
KNX system integration module
The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels.
The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels.
The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
INT-KNX-2
Charakteristikos
- Garantija
- 36 mėn.
- Išmatavimai
- 80 x 57 mm
- Gamintojo puslapis
- https://www.satel.pl/en/produktid/932
- Svoris be pakuotės
- 0.032 kg
- Pakuotės plotis
- 0.045
- Pakuotės ilgis
- 0.165
- Pakuotės aukštis
- 0.085
- Kategorijos kodas
- ADM
- CnCode (CnCode)
- 85311030
16 kitos prekės toje pačioje kategorijoje:
Likutis: 3 Turime. Pristatymas 1-2 d. d.
Colour Grey
Likutis: 3 Turime. Pristatymas 1-2 d. d.
Likutis: 10 Turime. Pristatymas 1-2 d. d.
Eaton Eaton Output cable IEC-Schuko 10A C14 - 3x Schuko-Box 1010081 Sockets quantity 3
Likutis: 8 Turime. Pristatymas 1-2 d. d.
Gembird Power Cube Surge Protector SPG6-B-10C
Likutis: 1 Turime. Pristatymas 1-2 d. d.
EnerGenie SPG5-U2-5 Power strip with USB charger, 5 sockets, USB 2A, 1.5 m
Likutis: 8 Turime. Pristatymas 1-2 d. d.
Gembird SPG6-B-6C Sockets quantity 6, Surge protector
Likutis: 10 Turime. Pristatymas 1-2 d. d.
PSU requirements Three CR123A batteries (pre-installed)|Dimensions 100 × 39 × 22 mm|Unit Brutto Volume 0.000357 cubm
Likutis: 3 Turime. Pristatymas 1-2 d. d.
Colour White
