MEMORY DIMM 128GB DDR5-5600/K4 KF556C40BWAK4-128 KINGSTON

€414.29
Tax included

Pristatymas į namus nuo: 4.72 €

1 - 3 darbo dienos
Fury Beast|Performance Gaming|DDR5|Module capacity 32GB|Quantity 4|5600 MHz|288-pin DIMM|CL 40|Memory timings 40-40-40|Nominal voltage 1.25 V|RGB|Colour White
Quantity
In Stock

Mokėjimo būdai

Saugus atsiskaitymas

128GB (4x32GB) DDR5 5600MT/s CL40 FURY Beast White RGB XMP
Kingston FURY KF556C40BWAK4-128 is a kit of four 4G x 64-bit (32GB) DDR5-5600 CL40 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 128GB. Each module has been tested to run at DDR5-5600 at a low latency timing of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers
Kingston
KF556C40BWAK4-128

Data sheet

Garantija
X
Vendor Homepage
www.kingston.com/datasheets/KF556C40BWAK4-128.pdf
Unit Net Weight
0.2 kg
Unit Box Width
0.12
Unit Box Length
0.17
Unit Box Height
0.025
Category Code
MEM
Frequency speed
5600 MHz
Total capacity
128GB
Number of modules
4
Module form factor
288-pin DIMM
CL
40
Nominal voltage
1.25 V
Memory series
Fury Beast
Performance
Gaming
Memory features
UDIMM/UDIMM
Memory timings
40-40-40
Specific features
RGB
Colour
White
Memory type
DDR5
Memory module capacity
32GB

16 other products in the same category:

Availability: 13 In Stock
Kingston FURY KF436C18BBK2/32 is a kit of two 2G x 64-bit (16 GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 32 GB. Each module has been tested to run at DDR4-3600 at a low latency timing of 18-22-22 at 1.35 V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2 V. Each 288-pin DIMM uses gold contact fingers.
Availability: 8 In Stock
Vengeance Low Profile heat spreaders have a reduced height of 1.03". They're designed for high-performance systems with extra-large CPU coolers, small form factor system builds, or any other space-constrained application where you need high-performance memory but standard Vengeance modules might not fit.
Availability: 8 In Stock
XPG GAMMIX D10 DDR4 memory modules are designed for gamers and PC enthusiasts with support for new Intel X299 plus SPD 2666MHz implementation, with factory speeds up to 3600MHz out the box. With high-quality PCBs, D10 improves signal transfer quality and maintains stable operation at all times. It also supports Intel XMP 2.0 for quicker and safer overclocking. Available in black and red, D10 has an eye-catching serrated heatsink with an open top for excellent cooling performance through rapid heat removal. In addition, its low height allows easy installation even in systems with limited space.

Svetainėje naudojami slapukai, siekiant suteikti maksimalų pirkimo patogumą.