Series Ultra|Stacking up to 8|Built-in management|PoE power budget 30 Watts|Switching capacity 16 Gbps|Power supply External|Software included Version 8.0.7|Port isolation, Storm control, Port mirroring, Multicast / broadcast rate limiting, Flow control, Jumbo frames, Egress rate limit|Dimensions 203 x 76 x 33 mm|Unit Net Weight 0.695 kg
With the DIGITUS 4-Port KVM Switch, you can operate four 4k-compatible PCs using a single USB keyboard and mouse. By pressing a button or using the remote control included in delivery, you can switch comfortably between the PCs, sparing you the trouble of replugging all cables. Output to a monitor occurs either via the integrated HDMI or the DisplayPort output. You can also switch between the audio signals for the microphone and speaker. In addition, two USB 3.0 ports are included on the front side for use with other peripheral devices like USB sticks or external hard drives on all PCs. If you place the KVM switch in an inaccessible location, you can use the IR receiver and connection cable included in delivery even if the KVM switch itself is not within the range of the remote control. Status LEDs on the front side of the switch show you the current configuration at all times. The slim switch features the added benefits of sturdy metal housing and the option of wall mounting.
Type L2|PoE ports 4|PoE power budget 60 Watts|Switching capacity 1.8 Gbps|Forwarding rate 0.89 Mpps|Dimensions 130 mm × 85 mm × 26 mm|Unit Net Weight 0.3 kg
PoE+ switch is an indispensable active device in any network structure, using power transmission through structured cabling. RSFE-16P-2C-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular will find use in alarm, fire and access control infrastructure. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in PoE/PoE+ - 802.3af and at standards. This makes it possible to provide up to 250 watts of total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is especially important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors.